A list of the contents of this article:

How to use homemade acidic water?

1. The self-made acidic water can be used in the cultivation of flowers at home, and can be used for reference by the following methods. Mix vinegar with water 250 cents 300 times and spray flowers and trees to make the branches green and bright. Attention should also be paid to prevent acetic acid from evaporating and should be sprayed in the morning and evening. Use watermelon peel (orange peel can also be) to add water, soak in summer to make 7~lO days, other seasons can be soaked in 20muri for 30 days.

2. It can be configured with rice panning water, vinegar and beer. The fermented Amoy rice water can be diluted with water to water the flowers. Vinegar is mixed with water in proportion and can be used to spray or wipe plant leaves. When diluted, undrunk beer contributes to plant growth. The use of acidic water: avoid soil Alkalization and provide nutrition. Choose low-sodium vinegar, diluted and irrigated flowers, or used for leaf wiping, nutrition supplement and disinfection.

3. In order to use home-made acidic water to provide benefits to your plants, please refer to the following methods: mix vinegar with water at a ratio of 250 to 300 times, and then spray on the plants. This will make the leaves greener and glossy. Remember to spray in the morning or evening to prevent the volatilization of acetic acid. Mix watermelon peel (or orange peel) with water and soak for 7 to 10 days in summer and 20 to 30 days in other seasons.

4. One way to make acidic water is to add edible vinegar. First of all, leave the tap water for 2-3 days to dry, then drip edible vinegar to make a 300-fold solution. In addition, ferrous sulfate can be added to increase the acidity of the solution. Acidic water can also be prepared from rice panning water. Amoy rice water is collected and fermented. After fermentation, the solution is taken out and diluted and used to irrigate plants.

5. In order to make acidic water for watering flowers, you can mix vinegar with clear water at the ratio of 1 to 300. Add about 10 milliliters of vinegar to each liter of water. Another method is to use rice panning water. Collect the rice water, let it ferment naturally, and then mix it with water at 1:1. If you have citric acid, you can dissolve it in water to make 0.1% citric acid solution, and then add the right amount of ferrous sulfate.

How to make acid water for watering flowers?

1. One way to make acidic water for watering flowers is to mix vinegar with clear water at the ratio of 1: 300. The specific method is to add about 10 milliliters of vinegar to each liter of clear water. Another way to make acid flower watering is to use rice washing water. Amoy rice water will be collected, let it ferment naturally, and then mixed with water according to 1:1 proportion.

2. In order to turn tap water into weakly acidic water suitable for watering flowers, it can be placed for a period of time to volatilize part of the carbonic acid gas. Before watering flowers, adding 1 to 2 drops of salt-free white vinegar to the water can slightly reduce the pH value of the water and make it closer to acidity. The mixture of peel and sugar water is used for fermentation, and after the fermentation is completed, this water can be used to water the flowers, which can also provide a suitable acidic environment.

3. Mix vinegar with water 250 / 300 times and spray flowers and trees to make the branches green and bright. Attention should also be paid to prevent acetic acid from evaporating and should be sprayed in the morning and evening. Use watermelon peel (orange peel can also be) to add water, soak in summer to make 7~lO days, other seasons can be soaked in 20muri for 30 days. This kind of water is not only slightly acidic, but also contains phosphorus, potassium, hydrogen, calcium and other nutrient elements. The addition of edible citric acid (appropriate amount) to the water can also make the water slightly acidic.

4. One way to make acid flower watering is to mix edible vinegar and clear water at the ratio of 1: 1, 000. Adding a few drops of ferrous sulfate solution to each liter of water can increase the acidity of the soil. Another option is to add an appropriate amount of citric acid to the water and then make 0.1% ferrous sulfate solution. This solution can effectively provide suitable soil pH value for acid-loving plants.

How to make acidic water?

1. One way to make acidic water is to add edible vinegar. First of all, leave the tap water for 2-3 days to dry, then drip edible vinegar to make a 300-fold solution. In addition, ferrous sulfate can be added to increase the acidity of the solution. Acidic water can also be prepared from rice panning water. Amoy rice water is collected and fermented. After fermentation, the solution is taken out and diluted and used to irrigate plants.

2. The production of acidic water: it can be configured with rice panning water, vinegar and beer. The fermented Amoy rice water can be diluted with water to water the flowers. Vinegar is mixed with water in proportion and can be used to spray or wipe plant leaves. When diluted, undrunk beer contributes to plant growth. The use of acidic water: avoid soil Alkalization and provide nutrition. Choose low-sodium vinegar, diluted and irrigated flowers, or used for leaf wiping, nutrition supplement and disinfection.

3. One way to make acidic water for watering flowers is to mix vinegar with clear water at the ratio of 1: 300. The specific method is to add about 10 milliliters of vinegar to each liter of clear water. Another way to make acid flower watering is to use rice washing water. Amoy rice water will be collected, let it ferment naturally, and then mixed with water according to 1:1 proportion.

4. Dripping vinegar: pick up the tap water in advance and dry it for 2-3 days, then add edible vinegar to make 300 times the solution, and you can also add appropriate amount of ferrous sulfate in the water.

5. Acid water for watering flowers can generally be made from vinegar mixed with clear water to make a solution of 300 times, and ferrous sulfate is added appropriately in the water. Amoy rice water can also be collected and fermented and mixed with clear water. Citric acid can also be added to the water, and then ferrous sulfate is added to produce 0.1% ferrous sulfate solution. Or you can prepare orange peel or watermelon peel, put it in a container and soak it in water, and it can be made after a period of time.

6. In order to avoid soil Alkalization, acidic water can be used to irrigate plants and replenish nutrients for plants. Flowers can be watered with vinegar, vinegar with less sodium chloride should be selected. Pour vinegar into a container, add the right amount of water, dilute it and irrigate the plant, and wipe the leaves. Vinegar can replenish nutrition for the plant and play a role in sterilization and disinfection.