A list of the contents of this article:

How to make a handmade warship

1. To use cartons to make handmade warships, first prepare a square colored paper. Fold the colored paper according to the dotted line, form a crease, and then unfold. Next, fold the colored paper down to the middle crease along the dotted line, and then fold up along the dotted line. After that, fold down again along the dashed line, and then fold in half along the dotted line. Next, fold the dotted line toward the arrow to form a crease, and then fold the other side in the same way.

2. The way to make a handmade warship is as follows: find a piece of rectangular paper, waste paper, white paper, colored paper. Put it horizontally, then fold it down in half at 1/2 of the paper. The bottom is the opening of the folded paper, one page on the top and one page on the bottom. Fold the page above in half. Turn over another page and fold it up in half as well.

3. The method of manual warship with cartons is as follows: prepare a square piece of colored paper. Fold the trace along the dashed line, then unfold, fold down along the dashed line to the middle crease, fold up along the dashed line, fold down along the dotted line, and fold in half along the dotted line. Fold along the dotted line to the arrow, fold out the trace, then fold the same to the other side, fold the trace, then unfold, fold outward along the dotted line, draw the pattern, and it is finished.

4. First, fold the prepared square colored paper into diagonal creases, and then fold the adjacent sides of the creases, as shown in the following figure. The step is then flipped, and the two sharp corners are aligned and folded, as shown in the following illustration. Step to continue to flip, the two surfaces fold outward into a triangle, open and press down, as shown in the following figure.

How to make a three-dimensional warship with cardboard

The practice of making a three-dimensional warship with cardboard is as follows: preparation material: cardboard: used to make hull, deck, building and other structures. It is recommended to use thicker cardboard to increase strength and stability. Design warship: draw the plan of the warship on paper, including the hull, deck, building and so on. According to the plan, cut the cardboard to the corresponding shape and size.

I first made the hull and cut it out according to the shape of the boat with plastic foam, and then I wanted to make the boat more beautiful, so I drew some patterns on it, and then I glued some cannons on the boat, made a red flag out of red paper, stuck it on the toothpick, and stuck the toothpick on the boat, and the boat was done. The next step is to make the driving device of the ship. I installed the motor and the propeller, connected the wire to the motor and the battery, and finally pressed the drive on the boat.

Teachers pretend to be starling teachers, children pretend to be small animals, listen to music and move into the arch, guide children to observe the environment, encourage children to use materials on the site, carry out simple games, and perceive the common characteristics of objects such as garden, ring, ball and so on. The association of entering the garden. Guide the children to talk about the shapes and common characteristics of the garden cardboard, rattan rings and leather balls they come into contact with in the activities, which are all the shapes of the garden. And point out which part of the animal you play is in the garden.

How to make a handmade warship with cartons

1. To use cartons to make handmade warships, first prepare a square colored paper. Fold the colored paper according to the dotted line, form a crease, and then unfold. Next, fold the colored paper down to the middle crease along the dotted line, and then fold up along the dotted line. After that, fold down again along the dashed line, and then fold in half along the dotted line. Next, fold the dotted line toward the arrow to form a crease, and then fold the other side in the same way.

2. The method of manual warship with cartons is as follows: prepare a square piece of colored paper. Fold the trace along the dashed line, then unfold, fold down along the dashed line to the middle crease, fold up along the dashed line, fold down along the dotted line, and fold in half along the dotted line. Fold along the dotted line to the arrow, fold out the trace, then fold the same to the other side, fold the trace, then unfold, fold outward along the dotted line, draw the pattern, and it is finished.

3. Use waste cartons to make a large warship that children can move with them, so that they can play navy games at home with their dreams of sailing. These mobile fortresses, which are fun for babies to play, are very simple to make and have the effect of waste utilization. Step of making the cross-waist boat: find a larger carton and remove or cut off all the sealing tape on the surface with a paper cutter. Unfold the box and lay it flat on the ground.

4. People who hear about it for the first time will certainly not believe it. Many people say, "after all, waste is waste. How can it become a treasure?" I tell you, this is a great knowledge, as long as you pay attention, you will find that there are many things in life that can turn waste into treasure. Mother's Day is coming, and the teacher assigned a special assignment: when you go home today, each student has to help his mother share the housework. When I got home, as soon as I came in, my mother was not at home.

What does a warship do?

1. The steps to make a warship out of paper are as follows: prepare materials: a rectangular piece of paper. Prepare a rectangular piece of paper. Fold in half to the left. It's folding down in half. Lift the paper and fold the upper right corner toward the center line. The lower right corner is also folded. Fold the top one on the left to the right and separate the paper from the middle. Turn it over and fold the paper on the left to the right to align with the lower side. Flatten the upper two corners inward.

2. To use cartons to make handmade warships, first prepare a square colored paper. Fold the colored paper according to the dotted line, form a crease, and then unfold. Next, fold the colored paper down to the middle crease along the dotted line, and then fold up along the dotted line. After that, fold down again along the dashed line, and then fold in half along the dotted line. Next, fold the dotted line toward the arrow to form a crease, and then fold the other side in the same way.

3. The way to make a handmade warship is as follows: find a piece of rectangular paper, waste paper, white paper, colored paper. Put it horizontally, then fold it down in half at 1/2 of the paper. The bottom is the opening of the folded paper, one page on the top and one page on the bottom. Fold the page above in half. Turn over another page and fold it up in half as well.

4. Choose a solid or hollow structure: before making a wooden warship model, first determine whether the model is solid or hollow. Both methods require detailed drawings, including segmented sections. Make a solid model: if it is solid, cut out the dimensions of each part according to the profile and make sure that the parts can be spliced together to form a complete warship model.

How to make a wooden warship model?

Choose a solid or hollow structure: before making a model of a wooden warship, first decide whether the model is solid or hollow. Both methods require detailed drawings, including segmented sections. Make a solid model: if it is solid, cut out the dimensions of each part according to the profile and make sure that the parts can be spliced together to form a complete warship model.

Make the main keel (longitudinal) 2, make the sectional keel (horizontal) 3 according to the section drawing, assemble 4, lay the surface material. 5, plus the deck so that the hull is basically finished. Superstructure, one by one, the final assembly is, there is no special skill. Anyway, the drawings are as detailed as possible.

Making wooden warship models is relatively professional, and now there are generally two ways: one is to buy ready-made wooden warship models and assemble them according to the instructions, and the other is to find their own wooden materials to design and make their own drawings, but they are more professional.

All parts (except the sides of metal fittings and bars) must be polished, because you are making a wooden model, and the burr may destroy your whole model! All parts-all gadgets (1VR 350, 1V 500 or less) everything, including characters, pulleys, small ammunition, etc., are best made with ready-made products, which take a lot of time to do by yourself or don't even think about it.

Both expressions are correct and there are no typos. Both wooden warships and wooden warships can be used to describe warships built or made of wood. "Wood" emphasizes the material of warships, and the materials used to build warships are wood; "wood" emphasizes the manufacturing technology of warships, which are built by making wood into the required shape and size.

This class warship generally serves as the flagship of the fleet, with three artillery decks, 106, 122 guns, more than 900 personnel and a displacement of 2500-3500 tons. It is simply a "sea fortress". The second-class sail battleship is slightly smaller than the first-class warship. There are three gun decks with 8698 guns, with a capacity of about 750men and a displacement of about 2000 tons.